INDUSTRIAL AND AGRICULTURAL PRODUCTS RETAINING AND STORAGE SYSTEMS, BRIDGES, COMPOSTING SOLUTIONS, AERATED FLOORS
   
 


At STONEMARK we manufacture
a range of highly innovative products for various applications within the Agricultural, Industrial, Commercial and Municipal sectors.


Stonemark Industrial Limited

Birchwood, Henton, Wells,
Somerset BA5 1PD, UK

Tel: + 44 (0)1749 676969
Fax: + 44 (0)1749 679915
E-mail Stonemark Industrial

 

Construction

Bank Seats
Foundation or abutments are normally designed by a competent structural engineer, but typically, have a length which is equal to or greater than the width of the bridge, a width of at least a metre and should be kept well back from the bank on permanently firm ground.
When there is a tendency for rivers or streams to flood it is advisable to extend the bank seats up to the underside of the Precast units to prevent them from being dislodged.

Bridge Ramps
Ideally, the approach road should lead straight onto and off a bridge without changes in level or directions; it is also desirable that the bridge is wider than the road so that the traffic is not constricted against the parapets.
Due consideration should be given to the siting and sage operation of the mobile crane required to place the decks into position.
Survey and installation service can be provided. We welcome your enquiry.